6 Best New Things To Do With Raspberry Pi (Part 2)

- Free product key for windows 10
- Free Product Key for Microsoft office 365
- Malwarebytes Premium 3.7.1 Serial Keys (LifeTime) 2019

Project 2: Add USB storage to your Raspberry Pi

The Raspberry Pi has limited storage so use a USB hard disk to store photos, videos and music you want to access on it. Hard disks are more reliable than flash or SD card memory, so they're a better storage option. Remember, you’ll need a powered USB hub in order to use an external USB drive with your Pi.

The Raspberry Pi works with all standard USB drives but only once you’ve reformatted them using the efficient EXT4 system. Tum on your Raspberry Pi, wait for the Raspbian desktop to load and plug in the USB drive. On a PC, Windows assigns the drive a letter such as E: or F: but a Linux system such as the Raspberry Pi uses mount points. These use full paths such as ‘/dev/sdal’ rather than letters to indicate where a file is stored.

Double-click LXTerminal, type sudo blkid and press Enter. You should now see a list of all attached drives. In most instances, the path name for your drive should start with /dev/sdal. If it starts with something else instead, note what it is. You’ll need to substitute this path when typing the instructions below.

Storage data on a USB hard disk

Storage data on a USB hard disk

Before you can format the USB drive you need to unmount it. Type sudo umount /dev/sdal (or your drive’s path name). To format the card, type sudo mkfs.ext4 /dev/sdal-L usbflash.

This creates a new file system labeled ‘usbflash’. Create a location for it by typing: sudo mkdir/media/usbflash. Press Enter and type sudo mount/dev/sdal/media/usbflash to mount the drive, now, to give permission to all users to save to the disk, type sudo chmod 777 /media/usbflash.

Open File Manager and your USB disk should be listed under ‘places’. From now on, it will always be visible whenever it's plugged into your Pi computer and you'll be able to access the files stored on it.

Project 3: Turn your Pi into a NAS drive

Once you’ve attached a USB stick or USB hard disk to your Pi you can use it as a NAS (network-attached storage) drive. The Raspberry Pi can then be used to store digital photo albums, videos and music that everyone on the network can share, whether they’re using a Windows computer, Mac, tablet, phone or another Raspberry Pi.

Program your Raspberry Pi so you can use it as a network storage device

Program your Raspberry Pi so you can use it as a network storage device

First you need to set up the Raspberry Pi networking software Samba. As in the previous projects you need to use apt-get and LXTerrninal. Type sudo apt-get installs samba samba-common-bin, press Enter and allow up to 30 minutes for the installation to complete. Now type sudo smbpasswd-annobody to create a user called ‘nobody’. You can now share the disk with Windows PCs on the same network.

You now need to use the Nano text editor to edit Samba’s configuration file. Type sudo nano /etc/samba/smb.conf, use the arrow keys to move around the file. Scroll down to the Authentication section. Delete the # symbol from the start of the line ‘security = user’, press Enter and type guest account = nobody, then press Enter.

Scroll to the bottom of the file and add the following lines at the end, changing the path name to match whatever you used in project 2.


comment=Raspberry Pi





guest ok=yes

Press Ctrl and O to save the file, then Ctrl and X to exit Nano.

Finally, type sudo service samba start to run the networking software. The Raspberry Pi will appear as a standard drive you can connect to on your Windows XP, Vista, Me, 7 or 8 home network. Click its icon under Networks in Windows Explorer then double-click the rpi folder to see its contents. You can now use your Pi as a NAS (network-attached storage) device.

Project 4: Control your raspberry Pi remotely

Because the Raspberry Pi is so small it’s ideal for installing in other devices. In some cases you’re able to control the Pi through the host device (such as a hacked games console). In most cases you’ll need to control the Pi from another computer. To do this you need access to the LXTerminal so you can enter commands. You can set up remote control using a simple technology called SSH (Secure SHell).

Install PuTTY on your Windows PC to control your Raspberry Pi from it

Install PuTTY on your Windows PC to control your Raspberry Pi from it

Double-click LXTerminal. Type sudo raspi-config and click Advanced Options. You can now enable SSH. Use the arrow keys to move down to the <finish> button and press Enter. Type ifconfig onto LXTerminal and make note of the Pi’s IP address.

To use SSH on a PC, download the free PuTTY software ( on your PC. Double-click the .exe file, type the Pi’s IP address into the ‘Host Name (or IP address)’ field and click Open. In the window that opens type pi at the ‘login as’ prompt and raspberry as the password. You’ll now see a command prompt that you can use as though you were sitting at the Raspberry Pi.

Top 10
Free Mobile And Desktop Apps For Accessing Restricted Websites
TOYOTA CAMRY 2; 2.5 : Camry now more comely
KIA SORENTO 2.2CRDi : Fuel-sipping slugger
How To Setup, Password Protect & Encrypt Wireless Internet Connection
Emulate And Run iPad Apps On Windows, Mac OS X & Linux With iPadian
Backup & Restore Game Progress From Any Game With SaveGameProgress
Generate A Facebook Timeline Cover Using A Free App
New App for Women ‘Remix’ Offers Fashion Advice & Style Tips
SG50 Ferrari F12berlinetta : Prancing Horse for Lion City's 50th
- Messages forwarded by Outlook rule go nowhere
- Create and Deploy Windows 7 Image
- How do I check to see if my exchange 2003 is an open relay? (not using a open relay tester tool online, but on the console)
- Creating and using an unencrypted cookie in ASP.NET
- Directories
- Poor Performance on Sharepoint 2010 Server
- SBS 2008 ~ The e-mail alias already exists...
- Public to Private IP - DNS Changes
- Send Email from Winform application
- How to create a .mdb file from ms sql server database.......
programming4us programming4us